Jump to content

Log in or register to remove this advert

mf 35 engine diagnosis


rowan lee
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

One other thing I noted was when I killed the engine, there was a louder then normal 'sucking air' (grasping for breath - type sound) sound from the exhaust/manifold area.

 

Hi LEE on the glow plug that's called a Thermo start sometimes they could actually mess the engine out where they go on the running pouring diesel straight in to the manifold and kill the engine let us know if it's a four-cylinder a three cylinder tonight I go to see my old mate thanks John

Link to comment
Share on other sites

One other thing I noted was when I killed the engine, there was a louder then normal 'sucking air' (grasping for breath - type sound) sound from the exhaust/manifold area.

 

Hi LEE WHATS latest mate on your tractor I'm off down to see my old mate now so let me know he no.s about them thanks Jon

Link to comment
Share on other sites

If you rule out fuel and air; I think it might be valves. We had a ford 6610 that was very smokey and down on power. When dyno'd it had no constant rpm or hp, as it was fluctuating too much- 48-62hp from memory. It never went bang while we had it; but we have been through several engine rebuilds with generators over the last few weeks, and if your valves are not seating properly, your going to loose combustion, or have a valve go south.

 

On our lister when rebuilt; one of the pots (air cooled) was sucking and blowing. so we retorqued it and it sealed. Im just wondering of your head gasket is gone, or if your head could have warped?

Link to comment
Share on other sites

One other thing I noted was when I killed the engine, there was a louder then normal 'sucking air' (grasping for breath - type sound) sound from the exhaust/manifold area.

 

HI LEE I ask mate for you lee right clean air filter all so new fuel filters and fuel tap filter all so fuel pump filters inside pump all so fit new lift pump and new glow plug all the best with it mate thanks Jon

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.