Replacement carb for a husky 254xp (1997)

[Andyhope1977]

Hi, ive a issue with a carb on my saw, ive damaged it taking out the welch plug, (ham fisted ex diver) ive been advised to get a new carb. Im having problems getting a new walbro hda35b ive seen on a few threads that the 144-1 carb will do the job.. can any of the guru's on here please confirm. .?? Thanks in advance

[Stubby]

You could try Randy Duncan in the States . He has an " Aladins cave " of parts . Probably got a new 254 out the back somewhere !

[adw]

I probably have one. I will check tomorrow.

[SawTroll]

A HDA-87 would be ideal, but a -120 or -144 also is an improvement over the original.

[Andyhope1977]

Hi. Just to close this thread off. I got a hda 144 carb from rowena carbs spot on service and next day delivery. Saw fired up a treat. Tune it in work in the morning. Scrubbing on the powerlines. Thanks for the advice guys

[spudulike]

Hi. Just to close this thread off. I got a hda 144 carb from rowena carbs spot on service and next day delivery. Saw fired up a treat. Tune it in work in the morning. Scrubbing on the powerlines. Thanks for the advice guys

 

Rowena are the best, superb service:thumbup: