Carlton 130 belt.

[Johny Walker]

is it a fairly old grinder,

[skyhuck]

is it a fairly old grinder,

 

8 years or so I guess.

 

I was thinking it was a 130 (because of the 13 horse motor) but I guess it is a 90.

[Johny Walker]

8 years or so I guess.

 

I was thinking it was a 130 (because of the 13 horse motor) but I guess it is a 90.

 

my vermeer was on them type of belts , think it was triple, i changed it for 3, single crockadial type belts , never any issues with them ,they were celts for going around small pulleys ,

[Ty Korrigan]

Ah, there are 2 types of V profile.

I had this issue with the GM CS100 belts, being sold the right length but the wrong profile

The wrong profile and they totally 'marche pas'...

Ty

[Johny Walker]

V BELT SIZES B56 - B85 17MM X 11MM FREE UK NEXT DAY DELIVERY | eBay

 

 

http://www.ebay.co.uk/itm/A-SECTION-V-BELT-SIZES-A47-A76-VEE-BELT-13MM-X-8MM-FREE-UK-NEXT-DAY-DELIVERY-/190656251744?pt=LH_DefaultDomain_3&var=&hash=item2c63ff8760

[skyhuck]

Ah, there are 2 types of V profile.

I had this issue with the GM CS100 belts, being sold the right length but the wrong profile

The wrong profile and they totally 'marche pas'...

Ty

 

A and B are the two standard V belt profiles, but this is deeper than either, according to my supplier.

[skyhuck]

May just get two of the nearest I can find and see how I go, if they fail I'll ring OP.

 

Cheers for all the help.

[Peter]

There are a b c and z profiles, C section are 18mm deep by 22 mm wide.

 

You can get banded belts in any profile and number of sections.

[skyhuck]

There are a b c and z profiles, C section are 18mm deep by 22 mm wide.

 

You can get banded belts in any profile and number of sections.

 

Ah right, I was miss-informed, I shall do some measuring and give the guys you suggested a call, thanks Peter

[Peter]

I would suggest if you think you've found the right profile you order a single belt to check it fits. If it's a stock item you can return it, but if you order a banded belt it will be a special order and non returnable. A single C section belt will cost you about £10-15 depending on length.