Jump to content

Log in or register to remove this advert

Trailer Brakes while parked backwards down hill


Stephen Blair
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

We will do this in a scientific way, fact only. Give me some time and I will service both my trailers. Adjust the brakes as per manufactures instructions and i will take both down to the mot station and put them on the test rollers and get an actual brake efficiency reading in forward and reverse. One of my trailers is a Meridian and Aire ratchet lever and the other a Bateson over centre lever. Two different systems.

That way there is no speculation

Link to comment
Share on other sites

You must have a brakes way cable fitted if the trailer is fitted with brakes which is all trailers over 750kg but you can fit a chain as well! As the hitch on the trailer is only held on with 2 bolts!!

 

But the chain isn't a replacement for the breakaway cable!

 

I also know someone how towed a inflatable type lift boat up the motorway for about 60 miles

Trailer being a little nose heavy stopped off at the motorway services, went over a speed bump in the carpark and off came the trailer!!! It had been sitting on top of the ball for the last 60 miles !!!

Link to comment
Share on other sites

We will do this in a scientific way, fact only. Give me some time and I will service both my trailers. Adjust the brakes as per manufactures instructions and i will take both down to the mot station and put them on the test rollers and get an actual brake efficiency reading in forward and reverse. One of my trailers is a Meridian and Aire ratchet lever and the other a Bateson over centre lever. Two different systems.

That way there is no speculation

 

 

Don't forget on a hill with a loaded trailer the figures would be some what different!!!

Link to comment
Share on other sites

You must have a brakes way cable fitted if the trailer is fitted with brakes which is all trailers over 750kg but you can fit a chain as well!

 

I usually have a chain as well as the breakaway cable (chain is also padlocked) but I always make sure that the chain is long enough to allow the breakaway cable to do its job. Both cable and chain are attached to strongpoints on the Landrover not to the coupling.

 

If the trailer were ever to come off, I want the brakes to come on but I also want to retain some control over where it goes.

 

 

I also know someone how towed a inflatable type lift boat up the motorway for about 60 miles

Trailer being a little nose heavy stopped off at the motorway services, went over a speed bump in the carpark and off came the trailer!!! It had been sitting on top of the ball for the last 60 miles !!!

 

Many years ago I had a heavy flatbed plant trailer stolen. The trailer had a 2" ring coupling, the thieves had a transit with a 50mm ball. To effect the theft they dropped the ring over the ball and set off (not using the breakaway cable). About a mile up the road the trailer came off and entered someone's front garden at about 40mph, straight through a flowerbed and ploughing a furrow across the lawn. Fortunately it hit no one and missed the Beemer on the drive. I got the trailer back but it was only because the homeowner saw it come off a Transit that I was able to convice plod it wasn't my Landrover it came off! It makes you shudder to think what would have happened if it had come off outside a school at chucking out time. Shocking that the greed of these lowlifes completely overules any kind of social responsibility.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.