Jump to content

Log in or register to remove this advert

Tautline Hitch


tockmal
 Share

Recommended Posts

I learned to climb using a Tautline hitch, I went on to use a split tail system with a prussik loop, then onto a Blakes, followed by VT, Distil, Swabisch, Sportsjack etc.

 

These days I'm back to using the Blakes, but whenever I need more stability in the tree on a long branch walk etc using two TIPs wide apart, I'll pull up the end of my line and tie the tautline using a Blakes (see pic).

 

I think all apprentice climbers should know how to tie the closed loop system using just the rope before they learn to use a prussik loop.

 

Any opinions?

tautlineblakes.jpg.4f1b7144f13d84a4fcafde306e7d38fd.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

i agree everyone should be able to tie the system in case of emergency

 

Good point, especially if you damage your prussik loop, Blakes split tail or double eye friction hitch cord.

 

Mb is this a superfast tautline with just the one turn down at the top or have you knot tied it properly?

 

Also my Blakes set up without the slack tender micro pulley.

blakes.jpg.f9f1e490fdd28f6dd5e508e90435bfea.jpg

59765320d87fe_Tauntline20Hitch.JPG.747508182feb192a7277a784294a658c.JPG

Link to comment
Share on other sites

Do they not teach it on CS38 anymore then? .

 

Got to demo it on ass, but dont have to climb on it as far as I can recall. Agree that if u cant tie in off single roap u could end up in the brown stuff and good for secondaries.

Was taught to climb that way 20 odd yrs ago so still second nature (although I use bowline).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.