Bulldog Bone in action

[Thatoldchestnut]

Tachyon and cougar blue work brilliantly with the bone. And yes it can be used ddrt I believe that the best way is to use a thimble Prussic which you larks foot onto the lower Krab the clip top Krabi to the thimble end hope this makes sense

[Thatoldchestnut]

Do you know which bollard he is using in that vid Gordon is it the 5/8ths

Cheers Luke

[surveyor]

He said that it worked for him "out of the box", and I had the 5/8" bollard installed on his.

Of course each bone comes with three bollards included, so the Bone can be fine tuned.

[surveyor]

Thatoldchesntnut, would you mind posting a picture of your DdRT setup with the Bone?

Thanks, Gordon

[Thatoldchestnut]

I've get a pic up tomoz Gordon it's not my set up tho saw it on the buzz think Tyler posted it in a vid

[surveyor]

Please see Mike Powers post and picture on page 111 of the Treebuzz site of a potentially hazardous situation with a longer style loop tether attached on the upper arm of the Bone.

Gordon

[surveyor]

should have included a link, here it is. bottom of page.

Compact Bulldog Bone | Page 111 | The BuzzBoard

[Mikelawn]

I started a thread about ropes...just putting it in here n all as some of you may not of seen it....I need a all round rope off off to Norway....I climber with tachyon with spider jack and kernmaster 11mm with rope wrench....my bulldog bone is in transit so I need a rope that would be good for all...any ideas peeps...ones said cougar blue and another said eldrid powerstatic. Any other suggestions? Exsperinces....

[Thatoldchestnut]

Tachyon and cougar blue/grey mate both run great

[Mikelawn]

Just received this bad boy in the post...can't wait to finish work and get my hands on it. Cheers Gordon :-)