Jump to content

Log in or register to remove this advert

RHI payments on Solar Drying


arboriculturist
 Share

Recommended Posts

I used this as my guide for adopting a high temperature kiln

 

http://www.firewoodkiln.com/pdf/fplrn254.pdf

 

That's a nice brief paper, I hadn't seen it and it pre dates our offering by 10 years.

 

The thing is once you invest vast sums in the structure you must have a high throughput and the limiting factor is getting the water to move out of the wood rather than passing enough dry air over the surface.

 

Otherwise 20 days in the summer will do the job with no artificial heat input but that's no good if you have no dry wood now.

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

That's a nice brief paper, I hadn't seen it and it pre dates our offering by 10 years.

 

The thing is once you invest vast sums in the structure you must have a high throughput and the limiting factor is getting the water to move out of the wood rather than passing enough dry air over the surface.

 

Otherwise 20 days in the summer will do the job with no artificial heat input but that's no good if you have no dry wood now.

 

Thats the thing with solar rhi the initial cost is affordable and you have a guaranteed income for 20 years which is only dependent on the amount of sunshine not on the volume of kiln dried timber produced.

As for dry timber in the winter I have changed my processing so that processor size timber is cut and split during the summer and put in the solar kilns for winter sales. The over processor size just split during the summer into billets and put into the solar kilns ready for processing in winter when the split logs run out.

Link to comment
Share on other sites

Thats the thing with solar rhi the initial cost is affordable and you have a guaranteed income for 20 years which is only dependent on the amount of sunshine not on the volume of kiln dried timber produced.

As for dry timber in the winter I have changed my processing so that processor size timber is cut and split during the summer and put in the solar kilns for winter sales. The over processor size just split during the summer into billets and put into the solar kilns ready for processing in winter when the split logs run out.

 

How much can you fit in it your whole supply for the season.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.