Jump to content

Log in or register to remove this advert

standing larch values


Charlieh
 Share

Recommended Posts

I have the chance to buy some larch thinnings/clear fell this winter, its had its first thinning about 15years ago and has such been left untouched so its full of windblown stuff, its mostly small stuff probably between 8-12 inchs and about 45ft tall, its only a small block (maybe 3acres) so would be looking at hand felling and extracting with the ATV, or a mates tractor and forwarding trailer for the clear fell sections

 

So my question is whats the value of this like to be per m3 standing, for end use as firewood/chip for small domestic biomass, access isnt bad and there is a hard-standing and possibly barn i can extract it all into, the crop is pretty dense but just of a varied quality where it was never managed properly

 

any guidance would be really helpful

Link to comment
Share on other sites

Log in or register to remove this advert

Last year, people were talking about £10 per cu. m standing for hardwood, I'd have thought less for softwood, especially if it's thinning.

 

have you looked into cutting it for fencing or rustic poles or something other than firewood? Or what about sawing it for stakes?

Link to comment
Share on other sites

Last year, people were talking about £10 per cu. m standing for hardwood, I'd have thought less for softwood, especially if it's thinning.

 

have you looked into cutting it for fencing or rustic poles or something other than firewood? Or what about sawing it for stakes?

 

I was thinking around the £5-6 pound mark as there will be a fair bit of work to get each m3 given the small diameter,

 

I hadnt really thought about fence posts etc which is another possibility that may well pay better, i will contact one of the local timber yards next week to see what they require and would be willing to pay, as im not out to rip the guy off i want to offer him a fair price, and get as much for him as is possible, without leaving myself no margin.

Link to comment
Share on other sites

Larch is good for strainers and at 8-12" is the right size convert to 8feet peel them with a spade point them and sell at £7 each you will get a few from a stick.

 

just a thought as we use to use them all the time never even bothered to treat them as they last ages in the ground untreated.

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 years later...
Larch is good for strainers and at 8-12" is the right size convert to 8feet peel them with a spade point them and sell at £7 each you will get a few from a stick.

 

just a thought as we use to use them all the time never even bothered to treat them as they last ages in the ground untreated.

 

Interesting; had some larch to sell but 5'6" stakes a no go with larch - ends smash up too bad when rammed. Never thought of strainers unless euro get them from bars?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.