Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Can anyone tell me what this fungi is? I found a lot of it growing on a rather poor looking mature Ash. I was originally planning on pollarding the tree but after discovering this im wandering whether I should just fell it?

IMG_0179.jpg.6349d9419e171a7d8146fd50e36f8cc9.jpg

IMG_0181.jpg.36a96506c89d0ef435c25ee334f0e11b.jpg

Log in or register to remove this advert

  • Replies 24
  • Created
  • Last Reply

Top Posters In This Topic

Posted

All that cocoa dusting the leaves is spores, typical of a Ganoderma species, possibly applanatum in this case. Many hollow old ash pollards full of this fungi...

 

Sent from my GT-I9100 using Arbtalk mobile app

Posted
Can anyone tell me what this fungi is? I found a lot of it growing on a rather poor looking mature Ash. I was originally planning on pollarding the tree but after discovering this im wandering whether I should just fell it?

 

The pictures are clear enough to suggest Ganoderma sp and associated stem weakening. But you havent' shown size or shape of tree, presence of roads and footpaths nearby, buildings likely to be hit and so forth. It's not a fungus ID issue it's a risk asessment and duty of care issue.

Posted
The pictures are clear enough to suggest Ganoderma sp and associated stem weakening. But you havent' shown size or shape of tree, presence of roads and footpaths nearby, buildings likely to be hit and so forth. It's not a fungus ID issue it's a risk asessment and duty of care issue.

 

Here is a photo of the tree, (apologies for the poor photo quality my camera was on a special setting). The tree is located in a hedge directly alongside a small country road with both LV and phone lines running through it. The tree is quite bare already and has a fair bit of dead wood, most of the new growth seems to be coming from the bottom of the tree. The clients main concern is safety and if there is any chance the tree could fall over im sure he would be happy enough to take it down.

IMG_0184.jpg.10442631ecde317a81e026babfccc9d7.jpg

Posted

It looks like G. applanatum to me. If it is, it's not going to be very aggressive but it is what it says about the condition of the butt that is sounding hollow. Personally I would eb thinking (risk assessment-wise) Likelihood of failure medium to high, severity of harm to persons high, severity of harm to wires etc low to medium, target presence of persons low, target presence of wires etc high (permanent), overall risk tolerable but high end of tolerable. Then I'd be thinking are there any reasons to retain it that outweight the risk? It looks rubbish and has not future, so no. Then I'd think, what is the appropriate course of action that would reduce the risk to acceptable? Probably reducing its wind resistance by pruning it right back. Then i'd think, well if it didn't look rubbish before then it's going to look awful after pruning, and the pruning is going to knock the tree for six, meaning potentially removing it in 5 years time. Then i'd be thinking what if it could be taken right back to a pole so that it cna be left to die and provide habitat?

 

Then I'd offer the client the options, prune and monitor, remove completely or habitat pole.

 

But first I'd tap it with a mallet.

 

Can you let us know what comes of it, especially if you are told to remove it, I'd love to see a section through the butt.

Posted
It looks like G. applanatum to me. If it is, it's not going to be very aggressive but it is what it says about the condition of the butt that is sounding hollow. Personally I would eb thinking (risk assessment-wise) Likelihood of failure medium to high, severity of harm to persons high, severity of harm to wires etc low to medium, target presence of persons low, target presence of wires etc high (permanent), overall risk tolerable but high end of tolerable. Then I'd be thinking are there any reasons to retain it that outweight the risk? It looks rubbish and has not future, so no. Then I'd think, what is the appropriate course of action that would reduce the risk to acceptable? Probably reducing its wind resistance by pruning it right back. Then i'd think, well if it didn't look rubbish before then it's going to look awful after pruning, and the pruning is going to knock the tree for six, meaning potentially removing it in 5 years time. Then i'd be thinking what if it could be taken right back to a pole so that it cna be left to die and provide habitat?

 

Then I'd offer the client the options, prune and monitor, remove completely or habitat pole.

 

But first I'd tap it with a mallet.

 

Can you let us know what comes of it, especially if you are told to remove it, I'd love to see a section through the butt.

 

 

Thanks for taking the time to give all that advice, I will give the client the option of either felling or pollarding the tree, either way I should be doing it in about 4 weeks and will put up some photos if I do fell it. Many thanks.

Posted
It looks like G. applanatum to me. If it is, it's not going to be very aggressive but it is what it says about the condition of the butt that is sounding hollow. Personally I would eb thinking (risk assessment-wise) Likelihood of failure medium to high, severity of harm to persons high, severity of harm to wires etc low to medium, target presence of persons low, target presence of wires etc high (permanent), overall risk tolerable but high end of tolerable. Then I'd be thinking are there any reasons to retain it that outweight the risk? It looks rubbish and has not future, so no. Then I'd think, what is the appropriate course of action that would reduce the risk to acceptable? Probably reducing its wind resistance by pruning it right back. Then i'd think, well if it didn't look rubbish before then it's going to look awful after pruning, and the pruning is going to knock the tree for six, meaning potentially removing it in 5 years time. Then i'd be thinking what if it could be taken right back to a pole so that it cna be left to die and provide habitat?

 

Then I'd offer the client the options, prune and monitor, remove completely or habitat pole.

 

But first I'd tap it with a mallet.

 

Can you let us know what comes of it, especially if you are told to remove it, I'd love to see a section through the butt.

 

:thumbup1: an excellent evaluation sir

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.