Jump to content

Log in or register to remove this advert

So, like iffen I dont go to the APF, I got £500.00 to spend on an Inverter welder


difflock
 Share

Recommended Posts

So am no going.:crying:

But which welder?:stupido2:

With which "extras":hmmmm:

I am bamboozled by all the blurb, most of which is probably offering extras I dont need/wont use.

Do I need/want the TIG facility?

Do I need "pluse", though I do wish to be able to weld thin steel.

I do however wish to "max out" on a 16Amp/blue socket supply (right beside the consumer unit in the shed which is fed off a 16mm2 SWA cable)

cheers

Marcus

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 22
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

You'll pick up a good arc inverter welder for probably half your £500 and most of them will run on a 13 amp supply and an extension lead if you are not using full power all the time. My friend has a Thermal Arc 175 se which cost £215 and it does a brilliant job. You don't need pluse or pulse :D but an arc welder is not the ideal tool for welding thin sheet. You will struggle on anything under 2mm.

Link to comment
Share on other sites

Thanks Peatff, must be 6 or 9 months since I last looked, and I was surprised at how affordable they had become.

I Might also then buy a plasma cutter.

cheers

M

OOPs

Arbo . . .

Posted while i was typing

Thanks for the link, anything with a expected life of over 30 years Hobby use is overkill

cos I will(probably) be dead:lol:

Edited by difflock
Link to comment
Share on other sites

You can buy 'cheap and cheerfull' but this unitis built to last, which I expect Is high on your list of Specs.

 

Might be a quality item but very low output. Probably fine for biscuit tins but if you want one to weld reasonably thick steel you will need 180 amp minimum. It will take you ages otherwise. Personally I would speak to your local welding supplier to see what he recommends.

There are plenty out there with better performance and cheaper.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.