Jump to content

Log in or register to remove this advert

Which chain oil are you chaps using?


jnoon
 Share

Recommended Posts

Hi all

Quick survey?!

 

I've been on veg oil probably the last18 months , like the idea it's environmentally friendly & not harmful to breathe in.

 

Just wondering what other chaps are using ??

The cheapest I can find "proper bio chain oil" is Clarkes super tack bio @ £55 25l

My veg oil is around £25 for £25l

Using a can a day (approx) some times less some times more it works out including mix £208 a month for veg oil& mix

Or £280 for super tack &mix

 

(Based on stihl hp super oil & current rate of petrol @ £1.36l)

 

Question is do I carry on with the veg oil all be it a bit dry in the longest bars & the £72 a months adds up and I would have thought should easily cover any extra wear In bar & chains

 

Hope to get a few replies

Cheers

Link to comment
Share on other sites

Log in or register to remove this advert

Some of this bio oil dries like syrup on to the saw and is nigh on impossible to clean off - have some thought for the saw techs - some take hours to clean:001_rolleyes::thumbdown:

Not to mention the damage that can occur to those saws that are not serviced. I often see the cooling fins totally blocked with the glue from bio oil.

 

Cooling fins are there to cool, blocked ones not only prevent airflow, but effectively insulate the ally resulting in very poor heat conductivity from the cylinder to the air.

 

The result? Possible seizure, or baked crank seals, followed by lean seize.

 

It does happen.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.