Makita dbc 4010. crank seal supplier?

[eggsarascal]

Cheers egg. Do you know the significance of double or single lip seals??

 

Double seal has two rubber lips that are in contact with the shaft/spindle.

 

Single only has one rubber lip.

[GardenKit]

Everything you ever wanted to know about seals.

 

Radial shaft seals - SKF.com/Products

[mikerecike]

Everything you ever wanted to know about seals.

 

Radial shaft seals - SKF.com/Products

 

Cheers barrie.next week it'll be starter pawls or something equally exciting ( for me:) ).am self taught /self teaching and really do appreciate the support that you and co. give. Cheers.

[BILLSMOWERS]

i suspect it will have TC after the number on the seal if so it will be a twin lip seal most crank seals seam to be the TC type

 

http://www.bearingsbikepartsseals.co.uk/index.php/catalogsearch/result/?q=12x32x7

Edited January 26, 2014 by BILLSMOWERS

[mikerecike]

i suspect it will have TC after the number on the seal if so it will be a twin lip seal most crank seals seam to be the TC type

 

Search results for: '12x32x7'

 

cheers bill

[mikerecike]

me again - seal arrived - fitted it 12x32x7 - bit of grease on the lip and even a dab of hylomar on the outer edge.

as soon as the crank turns the seal also spins? and leaks air around the outside edge when pressure tested.

 

looked online for a bigger diameter - 12 x 33 x7 - doesn't seem to exist? - as i was putting it in i noticed that where it would seat there was like a large thin washer that would also turn - didn't pay much attention to that - not sure of it's purpose. The only other seal i've done was on a TS350 cut off saw and the seal clearly had a metal 'frame/body' that was tapped in snug with a socket - that all worked brill. I'm not sure how without that almost bendy metal exterior it would ever seal??

[bobh]

Genuine parts available here, have had good service from them in the past

http://www.mtmc.co.uk/Spare-Parts/Makita-Spare-Parts/Makita-Outdoor-Power-Equipment/Makita-DBC4010-Spare-Parts__p-240-12733041-12733052-42316.aspx

[mikerecike]

Genuine parts available here, have had good service from them in the past

Makita DBC4010 Spare Parts | Miles Tool & Machinery Centre

 

 

thanks a lot Bob - contacted them and they're going to get back to me - part no:

MSP-962900024.3 called a radial ring on their diagram.

 

cheers