Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

On paper they are almost identical except for power and the 545/555 lacking rev boost. I'm guessing that they cannot be tuned (easily) because of autotune. Are the cheaper saws worth it or would they be a disappointment

Log in or register to remove this advert

Posted

I brought a 545 in September - I think for a general purpose Arb saw, the semi pro Huskys (545, 555, 365 etc) are better than the XP version as they're more suited to logging up, being used by several users etc.

 

Whereas the XP saws are much more forestry orientated, I'm sure if you're felling softwoods all day RevBoost is lovely, however I personally wouldn't want it as my saw is used just as much for logging up as it is for felling.

 

Only my opinion though :001_smile:

Posted

Reckon the 550 + 560XPs are meant for all day felling and snedding. Whereas the 545 is less suited to all day work. The 555 has more oomph but why lug that much weight, when you could be carrying a 560XP?

 

Apart from lacking the 'Rev Boost' of the XPs, the others can't be bought with heated handles.

 

Depends what you intend to do with the saw and how often you're going to do it. Felling everyday in softwood or regular thinning - get the XPs. More occasional work and or ringing-up 300mm - get the 555. Occasional cutting and coppice - get the 545.

Posted

I would never buy one of the non-xp models, as they have lower power ratings, and lack the "RevBoost".

I'm sure they are very good saws, just not what I would like to use (fun is part of it). :sneaky2:

Posted
Reckon the 550 + 560XPs are meant for all day felling and snedding. Whereas the 545 is less suited to all day work. The 555 has more oomph but why lug that much weight, when you could be carrying a 560XP?

 

Apart from lacking the 'Rev Boost' of the XPs, the others can't be bought with heated handles.

 

Depends what you intend to do with the saw and how often you're going to do it. Felling everyday in softwood or regular thinning - get the XPs. More occasional work and or ringing-up 300mm - get the 555. Occasional cutting and coppice - get the 545.

 

You said it better than I did! :thumbup:

Posted (edited)
On paper they are almost identical except for power and the 545/555 lacking rev boost. I'm guessing that they cannot be tuned (easily) because of autotune. Are the cheaper saws worth it or would they be a disappointment

 

There are a sizable difference in power output as well, and there are good reasons for it - wider transfers etc. on the xp saws.

Edited by SawTroll

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.