Aspen fuel

[Eddie@aspen]

Thanks for your relpys. ☺

Hi Bikewoo,

 

You can always contact me direct email [email protected] or phone me 07568 108953

 

I have spent 20 year in the machinery trade and most of that time in the workshop so I will understand your questions and talk facts.

 

Kind regards

 

Eddie

[bikewoo]

Hi Bikewoo,

 

You can always contact me direct email [email protected] or phone me 07568 108953

 

I have spent 20 year in the machinery trade and most of that time in the workshop so I will understand your questions and talk facts.

 

Kind regards

 

Eddie

 

Thanks Eddie, that's good to know. Is there a lot to know? Do i just fill and nail it open in a big chunk of wood?

[Eddie@aspen]

Thanks Eddie, that's good to know. Is there a lot to know? Do i just fill and nail it open in a big chunk of wood?

Hi Bikerwoo,

 

Put Aspen in the tank.

 

You may need to adjust the idle stop screw (LA) because some kit runs a bit slower on Aspen.

 

You may need to adjust the low (L) screw to give more fuel at low speed.

 

Best put Aspen in and see how you get on.

 

Please contact me if you need any more info

 

Eddie

[bikewoo]

Hi Eddie, just been down to Skyland equipment and picked up my first can of aspen. I will let you know how I get on. Thanks for your advice.

[peatff]

I bought 5 litre of Aspen2 the other day and today I used the 135 to cut some oak. It was slow to warm to a tick over on unleaded stopping regularly and it was no different on Aspen so I turned the L screw in about 1/8 turn and it is plodding along nicely now I can put it down and leave it for a minute then pick it up and away with no restarts. It is absolutely smoke free and no smell which surprised me. I haven't touched the H screw and the saw seems to rev cleaner under load than it did, might just be imagination though.

[Eddie@aspen]

I bought 5 litre of Aspen2 the other day and today I used the 135 to cut some oak. It was slow to warm to a tick over on unleaded stopping regularly and it was no different on Aspen so I turned the L screw in about 1/8 turn and it is plodding along nicely now I can put it down and leave it for a minute then pick it up and away with no restarts. It is absolutely smoke free and no smell which surprised me. I haven't touched the H screw and the saw seems to rev cleaner under load than it did, might just be imagination though.

Hi Peat,

 

Great news!

 

Please remember if you or anyone needs any help with Aspen stuff phone me

 

07568 108953 or email [email protected]

 

When I am on the road (most of the time as I cover the whole UK) I can't always check Arb Talk.

 

All the best

 

Eddie