660 set up?

[Python]

Just out of interest who runs what on there 660? I've just had to replace half the damn running gear yet again I'm lucky if I see 4 months out of a clutch

 

 

Sent from my iPhone using Arbtalk mobile app

[Peter]

I'v never burnt a clutch out, and I run minimum 30", occasional 42"

 

I never let anyone else use my 660s though, having seen lads jam the chain up and just keep on trying to rev the engine until the clutch starts smoking...

[Python]

I'm running a 25" and rarely a 30" but it just seems to be eating things it's not burnt just worn out

 

 

Sent from my iPhone using Arbtalk mobile app

[Arbtech Tree Services]

25" but mostly 36" and no issues here.

 

Peter, what make is your 42" that fits the Stihl mount please?

[Python]

I've run various 046/460's with this set up for 10+ Years and no issues but this is the 2nd full replacement in 8 months the first one I put down to bad luck but now a 2nd she runs and cuts like a dream, she just seems to be rough with her hardware

 

 

Sent from my iPhone using Arbtalk mobile app

[mendiplogs]

I've run various 046/460's with this set up for 10+ Years and no issues but this is the 2nd full replacement in 8 months the first one I put down to bad luck but now a 2nd she runs and cuts like a dream, she just seems to be rough with her hardware

 

 

Sent from my iPhone using Arbtalk mobile app

 

HI MATE thats not right to burn out like ask steve on here whats up with it in 8 months do you do 1000 of hrs with it thanks jon

[mendiplogs]

I'v never burnt a clutch out, and I run minimum 30", occasional 42"

 

I never let anyone else use my 660s though, having seen lads jam the chain up and just keep on trying to rev the engine until the clutch starts smoking...

 

HI PETER that it mate now that will burn a clutch out:lol: thats just mad thanks jon

[Stubby]

You may have a crankshaft that is slightly oval / out of round / undersize . This could make the clutch bearing ware out prematurely causing the other parts to clap out ...?

[Python]

It's clutch, drum, bar and bearing regular as clockwork. Nothing looks like it's got hot or warped just looks like general wear and tear, I knew my bar was getting tired but the clutch just let go half way through a job yesterday afternoon no warning just death

 

 

Sent from my iPhone using Arbtalk mobile app

[Peter]

25" but mostly 36" and no issues here.

 

Peter, what make is your 42" that fits the Stihl mount please?

 

Sagenspezi. Look on eBay.de

 

Really wanted a sugihara, but Rob reckons there isn't much demand.

 

 

Sent using Arbtalk Mobile App