Jump to content

Log in or register to remove this advert

Can red HP? Stihl 2-stroke lose its colour


difflock
 Share

Recommended Posts

I was using the last couple of fills from the Combi can, it seemed a bit too much like straight petrol in colour.

I soldiered on with 2 re-fills worth before finally chickening out and tipping the last 1/2 litre back into the Jerry can and remixing.

Which certainly looked a lot "pinker".

But then the Combi jar was full.

The saw was going 100% and still is, an I am proper anal-rententive about my mixes, and/but the mix had probably being sitting about in daylight even sunlight.

Thoughts?

Cheers

M

Link to comment
Share on other sites

Log in or register to remove this advert

After ruining two MS200s a few years back we have a fixed procedure for fuel mix.

 

1. Put in the 2 stroke oil

2. Rinse the measuring jug with petrol and tip into the can

3. Add about another pint of petrol then shake the fuel container vigorously

4. Fill the container then re-shake.

When you've done the soggy jug with a hint of red oil confirms it was done properly

as does the redish foamy mix.

We usually get someone to witness the mixing too.

Sad and paranoid but saves big expense

Link to comment
Share on other sites

OK, thanks.

I will risk saying I have never yet siezed a 2 stroke in 40 years.

I use 2 stroke mix up to six months old.

But generally stored in a shady shed.

I wouldnay worry about the loss of colour, the oil canny evaporate.

Or at least it will evaporate a lot slower then the much more volatile petrol.

Cheers

Marcus

Link to comment
Share on other sites

OK, thanks.

I will risk saying I have never yet siezed a 2 stroke in 40 years.

I use 2 stroke mix up to six months old.

But generally stored in a shady shed.

I wouldnay worry about the loss of colour, the oil canny evaporate.

Or at least it will evaporate a lot slower then the much more volatile petrol.

Cheers

Marcus

 

I believe it can break down though. :001_smile:

Link to comment
Share on other sites

Perhaps TCD (Is he the oil specialist) would confirm, but I do not believe that oil can "break down" so easily, i.e. without extreme pressure or sustained high temps.

I could be wrong though.

Dye leaching or bleaching in sunlight, is however, entirely probable.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.