Unicender

[D Mc]

Anyone using the Unicender should take a look at this link.

 

Barrel attachment

[Marc]

That is very cool, maybe I'll get one to replace my zig zag.

[WorcsWuss]

This is still the ultimate must have for me.

Are the EVER coming here officially?

[BenR]

That looks good Dave! Is there still somewhere to clip a neck bungee into though? I like being able to spike up stems on removals with the bungee on and the slack just drops through. Will/can it do the same with the barrel attached! If so I need to get a barrel.

[Dan Curtis]

Looks cool, pretty much the same as adding a rw from what I can make out.

 

Looks like you'd lose the use of the top attachment so neck loops etc would have to be re-thought, but seemingly worthwhile.

 

Have you used it Dave?

[BenR]

My concern is loosing the self tending on spikes with a neck elastic. Looks like the barrel might add too much direction change to allow self tending. Could easily make an eye with the end of the barrel though..

[Old Mill Tree Care]

That is very very good. It will make the Uni cheaper to use, I would think.

I've never used a Uni though, before someone criticises me.

 

 

Sent with my iPhone from me, to you!

[Paul Smith]

Ahhhh! got to get one! Im sure I coulod have a bit of starter cord in there somewhere for clipping LOTS!

[D Mc]

...Have you used it Dave?

 

I have not. The Uni responds well to friction sharing tools and this is nice and compact. It also should be no problem to work out a way to attach a top clip-in point.

Edited April 24, 2013 by D Mc

[TKO]

Looks prime! Now they've done that, I am gonna have to seriously consider buying a unicender this weekend.