Jump to content

Log in or register to remove this advert

Westwood t2000


colwoodlandcare
 Share

Recommended Posts

One of my customers has a Westwood with a vtwin 20hp Briggs n Stratton. It's sat around for 2-3 years not being used.

I've put a battery on it and it turns 3/4 then stops. If you take the spark plugs out it spins as it should. If you put the spark plug in the left one its still spins but if you just have a plug in the right it only turns 3/4 again.

Is this the valves that need adjusting?

 

 

Sent using Arbtalk Mobile App

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 36
  • Created
  • Last Reply

Top Posters In This Topic

I think Eddie is on the right tracks with the valves.

 

Whip off the RH rocker cover and check the valve gear. You may just find that the exhaust rocker post has come undone and so the exhaust valve may not be opening.

If it was the valves it wouldnt turn over with the plugs out either! Check that the plugs are not too long a reach!

Link to comment
Share on other sites

As a few others have said it sounds like valves not working correctly. There was a fault with some of the bigger single cylinder (16hp+) b&s engines that required the exaust valve to be adusted so as to be permanently opened slightly so as to relieve compression slightly because the starters were not man enough to turn them over. I'l see if I can find the service sheet we were sent tomoro. Might be worth looking on the web for same info.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.