Jump to content

Log in or register to remove this advert

Lime tree removal


RC0
 Share

Recommended Posts

Another classic Reg, first post i looked at after getting back from my hols.

No criticism intended as I know you're a bit of a pioneer when it comes to experimenting with new rigging ideas so here's an old one...

Just out of interest any reason for not using a second pulley to take the lowering line away a bit further? I've been pushing my luck with second pulleys on thinner and thinner branches waiting for one to go, still not bust one (using common sense), so long as the angle of the rope is 45 degrees plus it seems almost anything goes, particularly when you can take all the slack / stretch out of the system with the hobbs.

 

Tom, considering the extent of decay it made more sense to sacrifice the extra rigging extension you refer to in favour of maintaining the main stem under as much direct compression as what was achievable. I could have further made things easier by also pushing the rigging point a little higher up, but again it was safer to keep it low and just make the best of it.

 

As you know, when dealing with hazardous trees it really comes down to an individuals experience and intuition in deciding upon a strategy….that of which to achieve ones objectives in the most logical order. Obviously the safety of the workers is paramount and should always come before efficiency and convenience….but I think its pretty clear in the video that things went easy enough anyhow, only I just had to do a little more cutting than what I would have preferred. Thanks.

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.