Oleo Mac saws??

[skyhuck]

I have bought a Petrol impact gun for undoing wheel nuts and other tight bolts on my mog.

 

It was advertised as having a husky saw as a powerhead.

 

I knew the saw needed many parts to get it up and running, I knew I could get husky parts no problem.

 

Turns out its a Ole mac saw and parts are hard/expensive to come by, any one know of any where that has SH parts and are any of the parts interchangeable with other makes??

[martin p]

what model?

[skyhuck]

Not sure, is there a 350??

[Johny Walker]

would an air gun not have been better ,as you have a compressor on the mog,to run it ???

[Figgy]

Could you not change the power head to a husky or stihl.

 

Figgy

[skyhuck]

Could you not change the power head to a husky or stihl.

 

Figgy

 

Don't think so, it bolts on to the side of the saw, don't think another saw would fit.

[martin p]

Not sure, is there a 350??

 

The reason I ask is that I have a 951 and years ago when working on the railway the gangs had "nut runners" as they called them and they were o.m.951 power heads about 50cc IIrc.

[skyhuck]

The reason I ask is that I have a 951 and years ago when working on the railway the gangs had "nut runners" as they called them and they were o.m.951 power heads about 50cc IIrc.

 

I think that will be the one.

[martin p]

what parts do you need? There is a guy near here used to sell o.m stuff and did have a few bits kicking around on scrap saws.

[skyhuck]

I need a fueltank/rearhandle, pull starter side cover, pot and piston, I would be interested in a whole saw, runner or not, cheers.