Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Posted
Sounds like you have not set the auto tune . In the the book it says start the saw , bring it to full revs and cut the full length of the bar As heavy as it will allow for thee to five mins . Something along those lines . Had the same problem with my 560 untill I realised you need to do this . Not all dealers are aware of this requirement . The hot start is as follows . No choke . ( I say this as some people forget that the ignition is always on and lift the red lever and flood it ) One pump of primer bulb , decomp in and pull . Always use the decomp or you will bust the starter pull . Remember ignition resets to the on position when you turn off .

 

Spoke to my dealer today and he said is its make 3-5 cuts min(minimum) not 3-5 minutes continuous.:sneaky2:

Posted
Yeh , i never did this burying it in wood for 3-5 continues minutes thing and no problems at all with the auto-tune.

 

That's what I'm saying, it's not minutes. Lets see how mine goes!

Posted
That's what I'm saying, it's not minutes. Lets see how mine goes!

 

I absolutely love mine and i've never ever felt that towards any saw in the past . It is so light and fast , right up my street . Just hope today is a minor blip i would really hate to get problems with this saw . :001_smile:

Posted
I absolutely love mine and i've never ever felt that towards any saw in the past . It is so light and fast , right up my street

 

That is why I want mine back fixed... or a new replacement.

Posted
Husky should scrap autotune technology i use 365xp and 395xp great

 

Who's to say it's the autotune that's at fault though?

 

For the extra power the autotune seems to provide, I;m hapy to take the chance :001_smile:

 

Never seen a 365xp though :lol:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.