Jump to content

Log in or register to remove this advert

Prussik loop upgrade.. whats more efficient??


jnoon
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

When climbing sappy trees or Seqoidendron giganteums i would use a cambium saver at top and carry a few over long prussick loops with 3 way twist lock binas each and try to keep rope off bark , and use an extra loop in my prussick when only on my camium saver ( due to so little friction ).But u can change that as friction builds up through running the rope . The same techinque can also be used in some nasty bits in all other works .

Link to comment
Share on other sites

  • 1 month later...

i take it you are using the standard prussic as your friction hitch... i would try a different knot.. i use the super happy.. it is amazing!! doesn't Bind up after long time under weight!!

and is Basicly a pleasure to use!!

 

coupled with a camBium saver and your ave got yourself a decent set up.

college is like your driving test.. they teach you how to get By.

Link to comment
Share on other sites

i take it you are using the standard prussic as your friction hitch... i would try a different knot.. i use the super happy.. it is amazing!! doesn't Bind up after long time under weight!!

and is Basicly a pleasure to use!!

 

coupled with a camBium saver and your ave got yourself a decent set up.

college is like your driving test.. they teach you how to get By.

Link to comment
Share on other sites

as above statements about cambuim friction/saver, you defo need one full stop.

 

not everyone going to agree with the next bit:

 

firstly if you can climb anything, and know your rope, friction hitches and the amount of sap plus weather conditions. You can redo you knots to compensate, the last scots pine I worked on, I only had one wrap on my distel hitch, the sap was great for holding me in place:laugh1:

Link to comment
Share on other sites

as above statements about cambuim friction/saver, you defo need one full stop.

 

not everyone going to agree with the next bit:

 

firstly if you can climb anything, and know your rope, friction hitches and the amount of sap plus weather conditions. You can redo you knots to compensate, the last scots pine I worked on, I only had one wrap on my distel hitch, the sap was great for holding me in place:laugh1:

Link to comment
Share on other sites

http://arbtalk.co.uk/forum/vbpg2image.php?do=full&p=596&d=1308740069

 

the link shows a happy. i was under the illusion that an extra rap was then a 'super' happy but i think it may be called a distal.. either way i find it to pretty dam good. got it as a knot on my side strop as well. done well with minimal slack it has a lot less 'sit back' than the vt.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.