Whoopie and loopies from Tenex 12 and 9mm

[Adam Bourne]

it's obvious it will fit.

 

no need for postulating, and text shouting.

 

I havent got a spacer to hand, and thats not a rig pulley, so its smaller.

 

of course we splice everything, but this was a question, and its been answered.

 

Ok no need to get your knickers all twisted.....

 

Fair enough on your answer I'm just looking out for people who would of seen your picture and thought ....oh there's a good idea I'll try that tomorrow with mine......

[tuttle]

Ok no need to get your knickers all twisted.....

 

Fair enough on your answer I'm just looking out for people who would of seen your picture and thought ....oh there's a good idea I'll try that tomorrow with mine......

 

or insults

[tuttle]

Ok no need to get your knickers all twisted.....

 

Fair enough on your answer I'm just looking out for people who would of seen your picture and thought ....oh there's a good idea I'll try that tomorrow with mine......

 

or insults

[Adam Bourne]

or insults

 

 

Obviously I have upset you and I'm sorry......

[Adam Bourne]

or insults

 

 

Obviously I have upset you and I'm sorry......

[treequip]

Obviously I have upset you and I'm sorry......

 

Even so, that picture is a long way from best practice so you did the right thing.

[treequip]

Obviously I have upset you and I'm sorry......

 

Even so, that picture is a long way from best practice so you did the right thing.

[DrewB]

would a larks hitch fit through the spacer?

 

Especially as that was the question......

[DrewB]

would a larks hitch fit through the spacer?

 

Especially as that was the question......

[tuttle]

it was only to see if the dyneema could be pushed through the gap.

 

as the spacer is the same size.

 

as for the pic, unless 'users' fully understand the pinto, they should not be using one.

 

and on a final note...does anyone use a larks head?

 

i do, every day