which log splitter??

[carlos]

hi we are thinking of buying a log splitter for the back of a mog. any advice on which to go for ie pto or striaght hydrulic, makes models etc. thanks carl.

[niftysteve]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230302668875&indexURL=0&photoDisplayType=2#ebayphotohosting

 

i saw these at the apf they look very good one man can lift the unit will plug straight on to the mog

i built my own own splitter which i use on the mog hydraulics

[lxpfair]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=230302668875&indexURL=0&photoDisplayType=2#ebayphotohosting

 

i saw these at the apf they look very good one man can lift the unit will plug straight on to the mog

i built my own own splitter which i use on the mog hydraulics

hello,we can supply the log splitter for you.Electrical log splitter and gaslion log splitter and so on.

 

msn:[email protected]

skype:lxpfair

[Buzz]

hi we are thinking of buying a log splitter for the back of a mog. any advice on which to go for ie pto or striaght hydrulic, makes models etc. thanks carl.

 

I had an old wessex hydrulic one one that sat on my 3 point linkage. The only problems were i had to bungy the spool valve lever open as it used to pop back to centre after a few minutes running when the oil had got warm.

 

Also the mog linkage didn't drop quite low enough (even adjusted) to get it on and off easily so i allways had to have it sitting on a couple of 8" logs.

 

I also only ever used to let the lads run the mog for 30 mins at a time before giving it a break as you only just need it on idle.

[turbull]

why did you only run it for 30 mins on your mog ?

[skyhuck]

why did you only run it for 30 mins on your mog ?

 

[WoodenHead]

Carl, get a hycrack pto type http://www.hycrack.co.uk

I use one of these - on a tractor - but a mate uses one on a Mog

Splits anything with virtually no maintenance. I split and stacked a couple of tons of stringy oak in an afternoon the other week

Cheers