What's on your bench today?

[burrell_]

sounds like u got a plan mate :thumbup:

[spudulike]

sounds like u got a plan mate :thumbup:

 

Yes, too long in the workshop inhaling carb cleaner:blushing: Given be some weird ideas:001_rolleyes:

[div_h]

Been thinking about that dolmar today.

 

Still in two minds over it as its a sweet running saw already. Button the other hand I would like a fast saw, I'm going to look into it at some point and strip it down see what i can do. Might need advise on changing to port timing. And any carb mods that can be done. The rest is just normal stuff. Might get a rude boy exhaust going aswell.

 

Ordered the 026 parts today aswell. As soon as they arrive the saw is ready for RTU.

 

Has it been behaving for you?

[Rich2484]

Has it been behaving for you?

 

Yes mate, very well behaved. Exept for me flooding it out yesterday it's been good as gold.

 

Still need to check the oiler over but not much of a problem there as it is sending oil out but IMO it doesn't seem to be enough as in too much left in tank compared to a tank of fuel.

[div_h]

Yes mate, very well behaved. Exept for me flooding it out yesterday it's been good as gold.

 

Still need to check the oiler over but not much of a problem there as it is sending oil out but IMO it doesn't seem to be enough as in too much left in tank compared to a tank of fuel.

 

That's a new oil pump on it, think its cheap one

[Rich2484]

That's a new oil pump on it, think its cheap one

 

Hhhmmmm, the adjuster screw just spins round. Will look at it and see what I can make of it.

[div_h]

Hhhmmmm, the adjuster screw just spins round. Will look at it and see what I can make of it.

 

if needs be al get a proper one for it.

[armchairarborist]

Been testing the MS200T ported and muffler modded saw - pretty pokey and cuts well with a 14" bar and would be even faster with a 12" on it.

 

Will be a good saw with lost of go in it.

 

You can see that it has had a bit of abuse from the carnage:thumbup:

 

you just need a backpack blower now to blow all that sawdust under the neighbours hedge:biggrin:

[wisecobandit]

Been on the 357, hopefully sorted out the chain oil over the bench issue it has and also just been and dual ported a new muffler I bought for it. Just need to refit muffler and retune the carb after the porting job and muffler mod - if I can be bothered to go outside if it ever stops pi++ing down...

[spudulike]

you just need a backpack blower now to blow all that sawdust under the neighbours hedge:biggrin:

 

he will love that...think he is getting wise to it though!