What's on your bench today?

[wyk]

Well, for trying to be conservative, she turned out OK. Here she is tuned to just nudge the rev limiter on high. So, a bit rich, but she seems to be happy rich. Loads of torque, too.

 

[Eddy_t]

Well, for trying to be conservative, she turned out OK. Here she is tuned to just nudge the rev limiter on high. So, a bit rich, but she seems to be happy rich. Loads of torque, too.

 

 

 

That video would be much better if you had decided not to scratch your arse!

[wyk]

That video would be much better if you had decided not to scratch your arse!

 

Man's gotta scritch what a man's gotta scritch.

[peatff]

A pair of braces wouldn't go amiss

[wyk]

A pair of braces wouldn't go amiss

 

Surprised no one's said anything about the tear in the jeans...

[spudulike]

Surprised no one's said anything about the tear in the jeans...

 

Looks like Arbtalk is all about Sartorial excellence nowerdays rather than modded chainsaws:lol:

[wyk]

How bout some muffler modding? Or should I dig up the porting thread?

 

 

 

STIHL MS241c-m - I just recalibrated it and she really freaking came alive. Winds out and revs like shes ported. I'll need to make a new vid. I got it in partial trade for the 372 work.

 

[Lumberwolf]

How bout some muffler modding? Or should I dig up the porting thread?

 

 

 

STIHL MS241c-m - I just recalibrated it and she really freaking came alive. Winds out and revs like shes ported. I'll need to make a new vid. I got it in partial trade for the 372 work.

 

Ace, I was just gonna start a new thread asking about a muffler mod on the 362c. I didn't know how the carb would handle it.

[wyk]

Ace, I was just gonna start a new thread asking about a muffler mod on the 362c. I didn't know how the carb would handle it.

 

When it comes to autotunes and stratos, some respond better to mods than other. My first attempt, I must not have recalibrated correctly, or it didn't take. It was a bit better, not not by much. Then I gutted the poor thing and recalibrated a slightly different way(on start 60+ secs, then off, then straight to 5 big cuts). And POW, she freakin came alive. It went from a lazy typical strato saw to something I can actually limb with.

 

Just make sure when you muffler mod that it doesn't end up eating away at a brake handle or sumfin. There's loads of room under the bonnet of a 241 for the muffler, thus the big ole hole.

[spudulike]

Ace, I was just gonna start a new thread asking about a muffler mod on the 362c. I didn't know how the carb would handle it.

 

Is that the standard carb model? I have done a couple and it gives the saw a fair bit more go! The "CM" is the Mtronic one isn't it??? The ones I have done are the normal adjust carb!