Jump to content

Log in or register to remove this advert

Means and Methods of Protecting Your Kit from Theft


easy-lift guy
 Share

Recommended Posts

Your insurance will only be as good as the number of claims you have against your policy.

Sooner rather than later your policy will become so expensive you will either not be able to afford it or your policy will not be reissued with any carrier. I do not believe it to be an emotional issue when it comes to protecting ones kit rather a matter of my property being stolen, it my property, not the theifs. Read the thread, it may and more than likely save your kit from the theifs in the first place!

elg

 

Yeah I know your right, Im just bitter and twisted after trying everything and having so much stuff stolen. Ive had a trackers on chippers, cameras on containers, expensive locks etc. Thieves in Manchester and Liverpool have hand held devices to detect where a tracker is on a machine, they either demobilize it or just throw it away before they take machinery. I know the cable alarm is a good deterrent and everything helps but its easy to set up a circuit not going through the handles of the saws and cut the cable that is.

Edited by David Riding
Link to comment
Share on other sites

Log in or register to remove this advert

  • 3 weeks later...

Chatting to a local tree guy about kit getting nicked, he told me that a few yrs ago a tree climber was feeding brash into a chipper in London when he realized it was moving forward:confused1: so he climbed onto the chipper and over the draw bar and over the truck, Indiana Jones style as it drove down the road, hammer in hand attacking the thief from above - got him.

 

Has anybody else heard the story and has a bit more detail to add:thumbup1:

  • Like 1
Link to comment
Share on other sites

  • 4 months later...

Good Post and helpful info. The cable alarms work well but there is a possible weak point I will not post in public. Should be able to do as in the USA and Australia to thieves. These mobile charge up angle grinders don't help with security issues.

 

Chainsaw producers should be forced to take the first steps with secure marking on all new saws. (I NEVER purchase used saws and scrap old ones for spares)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.