spot the problem with this chain loop

[Tom2020]

Spotted that straight away........ How did they manage to do that??

[Breezeblock]

i havent a clue how they managed it the chain was straight out the box i cant rememeber where i got it from should i just contact oregon and let them sort it out

[Robert_S]

i should have to get my moneys worth have you tried to get a chain in central scotland on a sat afternoon:cursing:

 

is dykes, thornhill not open on a sat afternoon? they use to be.

 

walter is sometimes in chieftain forge on a sat afternoon in bathgate.

 

Plummer brothers in Inverkeithing would be open its only minutes over the forth bridge.

 

to name a few

[Breezeblock]

i wasworking in cumbernauld ended up sharpening the old chain and finishing off with :thumbup:that

[Nick B]

That,s not good I would take that back to the shop right away and want 2 new ones:001_smile:

[tim Ber]

that chain wood be fine if you had foward and reversce on the saw

[Ross Beaumont]

aha thats funny . iv hade a few stihl chains that have had 2 cutters next to each over or 2 lefts in a row without a right. but that just takes the biscuit

[18 stoner]

The bit that i find funny, is that it looks quite well used and waxed up:thumbup:

[Ian Leach]

no brand new chain straight from oregon check the rivet heads they are factory done i can remember when i ordered them they were on back order and took ages i think they just joined 2 loops at the factory

 

Must have been a big back order, the time log on the photo is 2004.01.01 thats close to 7 years waiting for a part used chain

[Breezeblock]

evry time i take the batteries out the camera to get the cameracard out and put the batteries back in it sets itself to 2004. ancient camera you see!!!!!