Auto feed/ no stress device help!

[tommer9]

I have a 9" vermeer chipper, with problems with the no stress control. The part that is at fault is the APECS unit, and is made by Synchro Start. They have now been taken over by Woodward. I am having trouble sourcing this part, as it may not be made anymore.

Anyone got any ideas?

[treequip]

I am pretty sure I have syncro start unit from a 620i. You can have it, it may or may not work but it will be free.

 

Andy

[littlerob]

the main agent for vermeem ir in northampton uk they wil help you out no dout

Vermeer UK Limited

45-51 Rixon Road Wellingborough

Northants, NN8 4BA

 

Telephone 01933 274400

Fax 01933 274403

Products - Vermeer UK

[tommer9]

That would be awesome. Is it like this:

[tommer9]

the main agent for vermeem ir in northampton uk they wil help you out no dout

Vermeer UK Limited

45-51 Rixon Road Wellingborough

Northants, NN8 4BA

 

Telephone 01933 274400

Fax 01933 274403

Products - Vermeer UK

 

Thanks- I was there yesterday:001_rolleyes:(I have had vermeer chippers for about 9 years)

They are havng problems sourcing one!!

[Mesterh]

If you cant get a replacement part you can buy a different type of unit altogether around the £300 mark. It fits any auto feed system I think plus you can adjust the rpm of the rollers kicking in/out and it has an hour clock. OH and tells you the rpm of your engine so can help if you think it aint running to full capacity etc.

 

If your interested I'll have a look about at who sells them.

[TimberCutterDartmoor]

Woodward direct???

 

or

 

http://www.dsf-technologies.com/upload/proddocspdf/proddocspdf_2_213.pdf?PHPSESSID=6fc37f0b4f124e5b14d3993721da0b87

 

Sorry to hear this mate...

[tommer9]

Cheers guys. I have spoken to a few suppliers, and a few have mentioned a new part that is different but will work, for around 3-4 hundred. If i could get the original it should be between 150 and 200.

Cheers for the link TCD. I knew about the no stress.

[treequip]

That would be awesome. Is it like this:

[ATTACH]47158[/ATTACH]

 

Yup, thats the one.

 

PM me an address and I will pop it in the post

 

Andy

[tommer9]

Mate you are a star.

TCD- thanks for that PDF link- i have now established that i need an ESSE 1 unit. I just need to find a supplier, unless Andy's is a goodun!!