Stump Grinder Teeth

[White Noise]

Evening people . I just wanted to know the best / cheapest place to buy the old style finger teeth for a stump grinder . The last set I bought in 2009 was £1.05 per tooth but I cant find the same supplier and have forgot the company name :blushing:Any help would be cool .

[Mesterh]

Cant help sry but at that price you shouldnt of lost their number:scared1:

[White Noise]

Cant help sry but at that price you shouldnt of lost their number:scared1:

 

Does seem cheap but I,m 99% sure it was just that ? Saturn Knives £1.99 each ? . Is that about right now .

[Dean Lofthouse]

There used to be someone on ebay selling them new at £2.50 and I vagely remember saturn selling some but dont know what price.

 

\Mine uses finger teeth but mine have a small locating slot in, I haven't found anywhere that sell them, I've had to retip the ones I have

[Shane]

Last year I bough a load (60) of teeth for about £1.00 each - cant remember exact amount but they were very cheap. Guess what.. they were rubbish. Apart from very poor brazing dribbled all around the tips they had to be lightly ground to fit into the half inch pockets. Someone warned me about cheap teeth beforehand, now I know. Also several of the teeth bent, some snapped and on some the carbide tips actually broke!

The supplier told me I must have been doing something wrong with the grinder! Never happened with any other teeth in six years.

If you are still interested I got them from Global Recycling 0870 7708540. I did get a full refund in the end but they were reluctant - Cheap is often more expensive (in the long run)

[Mesterh]

Last year I bough a load (60) of teeth for about £1.00 each - cant remember exact amount but they were very cheap. Guess what.. they were rubbish. Apart from very poor brazing dribbled all around the tips they had to be lightly ground to fit into the half inch pockets. Someone warned me about cheap teeth beforehand, now I know. Also several of the teeth bent, some snapped and on some the carbide tips actually broke!

The supplier told me I must have been doing something wrong with the grinder! Never happened with any other teeth in six years.

If you are still interested I got them from Global Recycling 0870 7708540. I did get a full refund in the end but they were reluctant - Cheap is often more expensive (in the long run)

 

They the bandit dealers?

 

At a £1 a tooth its very cheap you can hardly buy the tungsten tips for that price.

[White Noise]

There used to be someone on ebay selling them new at £2.50 and I vagely remember saturn selling some but dont know what price.

 

Mine uses finger teeth but mine have a small locating slot in, I haven't found anywhere that sell them, I've had to retip the ones I have

 

Cheers .

 

Dean the teeth on your machine are strange . Never seen them before

 

Shane Suppose your right may cost more in the long run .

 

Mesterh Not worth retipping . I remember someone saying they had teeth from china at a quid each and just through them away after use

[Ian C]

There used to be someone on ebay selling them new at £2.50 and I vagely remember saturn selling some but dont know what price.

 

Mine uses finger teeth but mine have a small locating slot in, I haven't found anywhere that sell them, I've had to retip the ones I have

 

Dean, can you not mill a slot in some normal finger teeth or are the shanks a dif size also?

 

Im off to Saturn knives for a set of rayco super teeth v seen.

[White Noise]

Dean, can you not mill a slot in some normal finger teeth or are the shanks a dif size also?

 

Im off to Saturn knives for a set of rayco super teeth v seen.

 

What machine do you run Mr IC Trees .

[Dean Lofthouse]

Dean, can you not mill a slot in some normal finger teeth or are the shanks a dif size also?

 

Im off to Saturn knives for a set of rayco super teeth v seen.

 

Thats the route I'll go down if I cant find any Ian