Rate my oiler

[peds]

Well done that man. 

[AHPP]

Just took it apart, cleaned it and put it back together. You have to clock the oiler so the hole in it, not the slot, lines up with the hole in the plastic saw body. See the notch/slot end opposite it in this picture. 
 

 

You also have to press it in to the correct depth so the aforementioned holes line up. I did some clever measuring and set a nut as a depth stop. 
 

 

Anyway. That didn’t work because I clearly measured something wrongly so I just pushed it the whole way and it works now. 

Edited Monday at 19:27 by AHPP

[openspaceman]

1 hour ago, AHPP said:

You have to clock the oiler so the hole in it, not the slot, lines up with the hole in the plastic saw body.

Swot I sed

[AHPP]

What do you want; royalties?

[openspaceman]

Cheeky whippersnappers should take note of their elders if they have asked for advice

[AHPP]

Thanks, Getafix.
 

Anyway. Can you see anywhere you’ve scrumped apples from on this map?

 

 

 

 

 

 

 

Edited Monday at 22:16 by AHPP

[AHPP]

November 1945. No M25, no Heathrow, no VAT.

Edited Monday at 22:10 by AHPP

[openspaceman]

17 minutes ago, AHPP said:

November 1945. No M25, no Heathrow, no VAT.

Just a bit before my time but it hadn't changed that much from the map until the 1970s. I can make out the intersection of the road adjacent to this house which had already been here 80 years in 1945. Mind I suspect that this was a re jigged map of the 1931 survey.

[AHPP]

I had to look it up. The M25 was started in 1975. Wikipedia says it was finished in 1986 but that’s not what I saw crawling round it the other week.