help with greenmech cs100

[naturarbo]

Hello I am servicing my chipper, need to replace a bearing, there is a tl bush and doesn't allow to remove the old bearing.
How can I work this?

[GarethM]

It's called a key, pair of wire cutters and it should come out.

 

Plus that bearing is probably the locking collar type with a grub screw, unless it's just a spacer.

Edited November 16, 2024 by GarethM

[Rough Cutter]

Yep pull it out then you can get at it.

 

Part number 15 shows it 

[Jase hutch]

What ????

[Mike Hill]

TL

 

Taper lock?

[GarethM]

  On 16/11/2024 at 17:56, Mike Hill said:

TL

 

Taper lock?

Expand  

Even if it's just a spacer instead of a taper lock, he'll need a big wrench to free it anticlockwise as it'll be tightened and full of sawdust.

 

And note, remove the spark plug leads!.

 

Are the bearings shot, noisy as that looked pretty ok.

Edited November 16, 2024 by GarethM

[naturarbo]

  On 16/11/2024 at 18:05, GarethM said:

Even if it's just a spacer instead of a taper lock, he'll need a big wrench to free it anticlockwise as it'll be tightened and full of sawdust.

 

And note, remove the spark plug leads!.

 

Are the bearings shot, noisy as that looked pretty ok.

Expand  

There is a lot of play with the bearing and when is slowing noise of metal banging cames from it.

Please @Gareth M the spark plug leads because of?

Edited November 16, 2024 by naturarbo

[Rough Cutter]

  On 16/11/2024 at 18:33, naturarbo said:

The is to much play with the bearing and when is slowing noise of metal banging cames from it.

Please @Gareth M the spark plug leads because of?

Expand  

So it doesn't start while you are working on it

[naturarbo]

  On 16/11/2024 at 18:35, Rough Cutter said:

So it doesn't start while you are working on it

Expand  

@Rough Cutteris there a chance of starting without the key in ignition?

[GarethM]

  On 16/11/2024 at 18:42, naturarbo said:

@Rough Cutteris there a chance of starting without the key in ignition?

Expand  

Is it really worth the risk ?