Jump to content

Log in or register to remove this advert

Notch Rope Runner Vertec


gand
 Share

Recommended Posts

6 minutes ago, kram said:

 

In the video opening shot, note the carabiner and the wear on the top corner. Appears it is binding on the black peice and preventing it releasing. That is not normal wear for a biner.

IMG_20241231_110358.jpg.d8b5362b4241f421ac099eab914173ed.jpg

 

It doesnt look like a huge carabiner, just a bad design on that part. Can the black piece be adjusted up as it appears to be the bottom of its travel.

 

I'd suggest trying it with a skinny steel mallion rapid quicklink.

 

Anything in instructions about compatable carabiners?

Wow good spot, that is a lot

of wear if it's from the Vertec?! 
 

A chap on YouTube overcame the problem of the carabiner hooking up by using a DMM swivel or something similar I think...

  • Like 2
Link to comment
Share on other sites

Log in or register to remove this advert

 

I spoke to honeys regarding the tending issue before crimbo. They said notch were looking into it.

 

They advised using a narrow profile karabiner. I took mine out for its first run today, with a dmm oval it was a no go, jammed straight away like in the videos doing the rounds.

switched to a hms mini super safe an it worked fine, bird was much friendlier on the hands and the lack of pulley wansnt noticed as much as i thought it might be on ascent, tending slack or when pulling slack through to install redirects.

 

Curious to see how it goes in the wet, always found the pro sucked.

Link to comment
Share on other sites

Been ill over christmas so haven't had much time to get out. Had more time with the DMM Director. Cathes ever so slightly but no locking up. No wear like as been seen on some crabs. I've now got a Rocko and that works fine.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.