Jump to content

Log in or register to remove this advert

Clutch drum/rim sprocket question


kram
 Share

Recommended Posts

Im after a clutch drum that will allow me to use .325 sprockets and chains. I have a 7 and 8 tooth rim sprockets with 19mm splines so that will be preferable. The saw has 22mm splines. Best option would be a .325, 8 tooth 22mm spline rim sprocket. Or a spur sprocket. Unfortunately dimensions are not often listed so finding a suitable match is a pain.

 

It seems there may be .325 rim sprockets with other size spines but I dont see any with 22mm bore. A 9 tooth might exist but would likely require a more powerful saw to drive the chain that fast (Its a 372xp)

 

I have a lathe and tig welder, worst case I will weld/braze the rim sprocket to a lump of decent steel and turn a new clutch drum, but its more effort than I'd like (most of which is swapping the collet chuck to the 4 jaw.. the turning I enjoy!)

 

I have a very cheap supply of .325 20" chains so its worth the effort.

 

Out of interest, anyone know what grade of steel a normal clutch drum is made from? No point using the 708m40T if mild will do it - but I think that may wear excessively from the brake.

 

Thanks

Mark

Edited by kram
Link to comment
Share on other sites

Log in or register to remove this advert

Go on line and you will find 9 tooth rims that will fit the large drum as per 372. Have never seen an 8 tooth lge rim and would suspect it would not have enough "meat" to last . 

AS for a 372 running it, if the saw is in good order and you can put an edge on the chain it will be fine. I run that combination a lot in hard and soft woods with no problem. I would add a good quality chain of course !

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.