Husky 560xp won't pick up.

[Aled Hughes]

  On 27/05/2023 at 19:00, spudulike said:

Worth getting a dealer to plug it in and see what the CST read out looks like. You can often read a fair bit in to what the H&L is set to. 

Did you check the pump diaphragm? I have seen the pump flaps holed on high use saws.

Has the saw got decent compression? I have also seen poor compression on high hours saws but saying that, the one I have in at the moment is 371 hrs and has very decent compression.

Expand  

Good compression, no piston scoring, pump diaphragm was rather hardish tbh. Like you say spud worth getting it plugged in and see what comes up. No idea on hrs you obviously have the software to read this I take it? Thanks 

[Aled Hughes]

  On 27/05/2023 at 18:43, adw said:

It almost sounds like this thing only has boot software on the auto tune unit.

Expand  

Ok, that's over my head unfortunately I'm more nuts m bolts!!

[spudulike]

  On 27/05/2023 at 21:15, Aled Hughes said:

Good compression, no piston scoring, pump diaphragm was rather hardish tbh. Like you say spud worth getting it plugged in and see what comes up. No idea on hrs you obviously have the software to read this I take it? Thanks 

Expand  

Yes, I have access to it....where are you in the country.....and don't take that as me wanting work but you may be just down the road!

[Aled Hughes]

  On 27/05/2023 at 22:06, spudulike said:

Yes, I have access to it....where are you in the country.....and don't take that as me wanting work but you may be just down the road!

Expand  

Mid Wales, I would be able to travel or post thank you 

[spudulike]

I did have suspicions with your Christian name being Aled.....unfortunately not just down the road and have knocked the postal repairs on the head! Sorry.

[Aled Hughes]

  On 28/05/2023 at 20:04, spudulike said:

I did have suspicions with your Christian name being Aled.....unfortunately not just down the road and have knocked the postal repairs on the head! Sorry.

Expand  

Shame, trying to find someone more local if not it will be scrapped.

[Dan Maynard]

  On 28/05/2023 at 22:26, Aled Hughes said:

Shame, trying to find someone more local if not it will be scrapped.

Expand  

Is it not worth a carb kit before scrapping it? You said the diaphragm felt too hard in an earlier post, could be the problem.

[Aled Hughes]

  On 29/05/2023 at 06:41, Dan Maynard said:

Is it not worth a carb kit before scrapping it? You said the diaphragm felt too hard in an earlier post, could be the problem.

Expand  

I will try that first thank you