Tw230

[Dftree]

Hi, does anybody have a problem with the 230 not shooting the chip to the front of the truck? 

[PeteB]

Is it the 25hp type? Have you checked the basic things like blades, shear bars and gap? Whats the quality of chip like?

[Johny Walker]

Depends on size if truck mine gets it to front no probs, 

[s o c]

Green trimmings might fall short sometimes if not much stemmy woody stuff with them or if wet but most material will hit the headboard no problem (11 foot long body)

[Dftree]

It's the older 35hp? Engine. Chipping into a transit. Blades are changed regularly and the anvil has been changed recently. Switching the chute from a 150 help's a bit, as it's longer, but doesn't throw it as far as a 150.

[Will C]

Are the fins good on the flywheel? If the fins were bad the earlier machines soon lost there throw. I can’t comment on the newer Timberwolf machines from experience 

[Dftree]

I've had a chance to look at the fan blades and they are complete although there is a bit of play in the rotor bearing. I've also changed the out let chute from a 150 and this has helped as it is about 6" longer, was this done to save weight?

[PeteB]

There is a technical help section under the 'Forum' last which has a link to TW. Try posting in there and give them a chance to respond going forwards.