Zenoah 2500T

[Moose McAlpine]

21 minutes ago, peatff said:

What is the bar pattern on them anybody ?

 

I think it's Husky small pattern. At least the 2700, which is the same as my T525 is that.

[Cut4fun]

Mine didnt come with bar chain. So I put a 12" 45DL 63PS square filed chain and oregon A041 bar. 

Will just go back to round once it needs touch up.

 

 

 

 

[Cut4fun]

2 hours ago, peatff said:

 

 It has a decent bar on it but if I change it I would like to try a 10" replacement. What is the bar pattern on them anybody ?

I have a A041 on mine. 

 

It might work the Husky 338 bars in A095. But havent tried that yet.

[peatff]

If an AO41 works I'll get one when it needs replacing thanks.

[bmp01]

Up the page a bit I said I fitted a Stihl narrow kerf bar and chain - had the clutch cover off at the weekend so cleaned it up took a piccy, see attached.

TBH I'd forgotten the detail - you can see it needed new holes in bar for the tensioner and oil feed..... What you can't see is the hole to connect through to the bar rails, bit tricky that one only 1.1mm dia.

Chain oils OK but surrounding area is also pretty oily so maybe not sealing too well.... I'll turn oiler down to min.