Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Just picked up a Japa 300 mobile,thing was working very well until the chain and bar struggled to cut

and started smoking, after taking it off I could see the bar is bent,looks like a flimsey thing that you can bend easy with you hands

My question will a normal, say Stihl bar and chain fit and will the oil holes line up.....Thanks in advance

  • 2 weeks later...

Log in or register to remove this advert

Posted

I have a Japa 300 derv processor.  No not a stihl bar, a husky bar.  it uses a 13" bar, chain is 0.325" 56link, 1.3mm groove.  Husky fitment and holes line up etc.  Fuelwood sell the bars for about £20 & £10 for a chain and will give correct gear.  Or local husky places should have them.  If you need any more info I'll have a look at my bars etc.

Posted

Thank mate,i picked one up today,with that info I can get a couple ordered up as spares

Did you say your 300 is derv powered?very happy with the machine but cant half drink some juice,would it be poss to run off the Tractor hydraulics?and bypass the machines pump,

  • 2 weeks later...
Posted

yes mine is derv, a tank lasts a day lol.  Thats why I bought it, petrol is twice the price and uses twice as much.  Its a bit noisy but does the job.  I also have a PTO drive Japa 370.  bars are cheap for the 300 and last ages, I dont have a spare as get plently of notice before I need to change it.  Im no expert but think you would need to check your flow rate for the processor & tractor, then decide if you could run off the attachment hydraulics or need a pto pump but its all do-able.    

Posted
1 hour ago, AndyChalmers said:

Who says I dont?  I just said it was a derv engine, obviosly I use red derv.

DERV is the abbreviation for Diesel Engined Road Vehicle, so DERV diesel fuel is the white stuff you put in lorries. Rebated diesel fuel AKA gas oil is the red stuff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.