Remote controlled SureTrak test!

[PeteB]

[monkeybusiness]

That’s ace! Definitely going to end up pushed too far by someone ‘brave’ on the RC unit though I’d imagine...

[Bunzena]

Just idly thinking about other uses for this beast. 

 

Especially as there have been a few too many postings in the last few days about members having equipment stolen.

 

I'm imagining one of these in a lock-up that 'fires-up' and starts tracking towards the b4sta4rds that have broken in...

[richy_B]

Is it fully functioning from the remote? Would be great to be able to be in a 360 with grapple, feeding and moving the chipper along as you go. 

 

Ive recently got a farmi 260 with remote that I load with the multione which is helpful but it only controls the feed rollers.

[PeteB]

I'll find out exactly what the remote does. As it is designed as a 'hand fed', it may be that a manual switch changes it from tracked to chipper and then hit the yellow throttle and green for feed in!

[monkeybusiness]

Do you know if it is proportional control or go/stop with the tracking Pete? 

 

[Terry the Greek]

It is proportional still you have to be really careful because it's rough until you get used of it.

[PeteB]

Terry, aka Lefteris, is the sparky at GreenMech, he and his team do the final wiring on all models and Terry gets involved in the special projects. Thanks for answering, I was a right rush to get away north today!

[Jase hutch]

Welcome along Tez...?

[monkeybusiness]

6 hours ago, Terry the Greek said:

It is proportional still you have to be really careful because it's rough until you get used of it.

Sounds good (and expensive!!!)