Jump to content

Log in or register to remove this advert

stopping your saw hitting the ground?


Stihlwatersrundeep
 Share

Recommended Posts

If you are going to do them for the farmer, my suggestion is to only deal with the ones that are on the ground.

 

Take the branches off first (small undercut then taken from above).

 

Once you have a trunk to work with, find a spot where you can comfortably get your saw underneath and do a nice big undercut, being aware where the compression is (always take the compression side first). then finish from the other side. Then you will have a nice big trunk that you can cut three quarters of the way all along. Then use a big branch or pole to roll the trunk over and finish the cuts.

 

You should always take a second person up there with you andhave a spare saw.

 

But I agree with the others, you will be much better prepared once you have completed CS30 and 31

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

Windblown - If I were you I would leave well alone!

You need considerable experience to deal with them effectively.

Dont take the risk!

 

To deal with windblown (CS34) you need to complete the following units

CS30, CS31 & CS32 - You must have these tickets before you can do the training or NPTC Assessment for CS34.

Link to comment
Share on other sites

Wind blow is fun but you have to have your wits about you. I've heard so many stories of root plates falling and crushing people.....not good. Leave it to someone who knows.

 

Jamie

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.