Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

My venerable Viking GB370 shredder has finally died (after about 11 years) and I'm looking to replace it with something a bit more powerful. It'll mostly be used for shredding brambles, hedge trimmings and shrub trimmings, but some chipping of  1"-2" willow, beech and oak will be needed now and then (now in fact, as I've been renovating neglected trees and hedges, most stems measured in at around 40mm). I'm thinking about an Eliet Minor 4S. Has anybody any experience of them for this sort of use? The Major 4S seems a bit bigger then I'd probably need and more than I want to pay.

Log in or register to remove this advert

Posted

Yes, I will keep the "bigger" stuff as firewood, at least eventually (wish the willow would burn well, I have quite a lot!). That's one reason I'm looking at the Eliet Minor rather than the Eliet Major - no point paying for extra chipping capacity if I won't often be doing it! At the moment I'm sorting out the garden and the thicker stuff will be used to edge paths, with the chippings making the paths.

Posted
20 hours ago, Jwoodgardenmaintenance said:

Have you looked at skarper chippers or hornet? 

 

Jack

The sites I looked at for Skarper chippers didn't show any prices. So I suspect this is the if-you-have-to-ask-you-can't-afford-it Rolls Royce sort of chipper! At least as far as my pocket goes. Thanks anyway.

Posted
10 minutes ago, HeadShred said:

The sites I looked at for Skarper chippers didn't show any prices. So I suspect this is the if-you-have-to-ask-you-can't-afford-it Rolls Royce sort of chipper! At least as far as my pocket goes. Thanks anyway.

Look on fr jones it's on there ? 

Posted

I've not tried it, but if dry I see no reason the willow won't burn.  The arb waste I burn at the moment is mostly softwood that the web would tell you is not good firewood but I have no problem at all burning it.

Posted

Some willow spits so watch out on open fire, but I have burned loads in my wood burner - its not dense but if dry burns just fine.

Sorry can't help with Eliet, know more about chippers than shredders.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.