ID that chipper

[john p]

The wiring was a bit dodgy on mine, glow plug only worked occasionally, just used to put a wire from the battery positive straight in to the plug for 5 seconds and it worked fine!

[billpierce]

The wiring was a bit dodgy on mine, glow plug only worked occasionally, just used to put a wire from the battery positive straight in to the plug for 5 seconds and it worked fine!

Just dropped it in for mechanic to have a quick look check things like that.

Any pointers to manuals or people that may be able to help?

[billpierce]

On 30/06/2018 at 22:02, benedmonds said:

I don't think our antistress ever worked, not for long.. Pretty sure someone on here told me a way of resetting it. It would work for a while then not..

I have a vague memory that there way a pin that you pulled out that stopped the hopper lifting up.. 

Please tell me more about that chute extension. I have noticed mine seems to have a pretty glorious scatter fire on the chip. Thanks

[billpierce]

On 30/06/2018 at 22:02, benedmonds said:

I don't think our antistress ever worked, not for long.. Pretty sure someone on here told me a way of resetting it. It would work for a while then not..

I have a vague memory that there way a pin that you pulled out that stopped the hopper lifting up.. 

Please tell me more about that chute extension. I have noticed mine seems to have a pretty glorious scatter fire on the chip. Thanks

[Gary Prentice]

Woodchipper - 222MS.pdf Don't think I ever had an English version 

 

If it's not the right engine manual, I'll have the right one somewhere

lombardini 1003 engine manual.pdf

[benedmonds]

5 hours ago, billpierce said:

Please tell me more about that chute extension. I have noticed mine seems to have a pretty glorious scatter fire on the chip. Thanks

It was always a messy chipper. Used to leave a pile underneath as well..

The extension helped, just attached some folded sheet metal..

[billpierce]

3 hours ago, Gary Prentice said:

Woodchipper - 222MS.pdf Don't think I ever had an English version 

 

If it's not the right engine manual, I'll have the right one somewhere

lombardini 1003 engine manual.pdf

Thanks appreciated. Some very helpful folk on here!

[billpierce]

My engine says 625 on it is the only Id I can see

[Gary Prentice]

1 hour ago, billpierce said:

My engine says 625 on it is the only Id I can see

Is that on the plate shown on P14 of the PDF I posted? That no. doesn't ring a bell (but We've had 2-3 new engines in that machine over the years, I think there was a GM with a Lombardini at some point and the ST6 is also a Lombardini, so I might be getting confused myself.

[Gary Prentice]

1 hour ago, billpierce said:

Thanks appreciated. Some very helpful folk on here!

Nothing hard about inserting a PDF from file (thanks Mr B)