WANTED : Oregon 18" .058 .325, 72 DL Bar, Anyone selling?

[Stevie777]

I have. Been at this for days. Even Oregon doesn't have the info.

 

[eggsarascal]

7 minutes ago, Stevie777 said:

I have. Been at this for days. Even Oregon doesn't have the info.

 

Did you contact @RobD on here like Felix suggested?

[felixthelogchopper]

I just googled your saw and got hits all in French. Here's one link which should get you a head start. The bar shown is the wrong pitch and gauge bit it says others are available. If nothing else , it should help you find the right mount type.    https://www.webmotoculture.com/guide-chaine-tronconneuse-zenoah/1601-guide-chaine-tronconneuse-zenoah-50-cm-38-050-70-dents-3000312675290.html

Edited June 10, 2018 by felixthelogchopper

[Stevie777]

3 minutes ago, eggsarascal said:

Did you contact @RobD on here like Felix suggested?

Not yet. but i will.

[Stevie777]

7 minutes ago, felixthelogchopper said:

I just googled your saw and got hits all in French. Here's one link which should get you a head start. The bar shown is the wrong pitch and gauge bit it says others are available. If nothing else , it should help you find the right mount type.    https://www.webmotoculture.com/guide-chaine-tronconneuse-zenoah/1601-guide-chaine-tronconneuse-zenoah-50-cm-38-050-70-dents-3000312675290.html

Had a look through, They dont have the correct pitch or gauge for the 560, I would need to change the sprocket and chain. That's another 24 search. I would rather keep the Oregon bar and try and source one here, rather than import from France. Carlton and Ozaki bars any good.?

[felixthelogchopper]

1 minute ago, Stevie777 said:

Had a look through, They dont have the correct pitch or gauge for the 560, I would need to change the sprocket and chain. That's another 24 search. I would rather keep the Oregon bar and try and source one here, rather than import from France. Carlton and Ozaki bars any good.?

My point was that you can find the correct mount code which you need before you even get to pitch and gauge. Going by the code in the link, your bar is not a KO95 mount like the bar on Ebay. Carlton, Windsor and Oregon are all the same company. Ozaki is a more budget brand and sold commonly on Ebay over here.

[felixthelogchopper]

Have you had a shift through this? If not, you might find what you want.     

https://www.webmotoculture.com/329-guide-chaine-tronconneuse-zenoah

[Stevie777]

D176 in the mount code in Oregan pro lite 21 BPX. I'm pretty sure that's the Bar that i need. Is there such a thing as a chart where I could look up other bar manufacturers for alternatives.

 

 

[bmp01]

On 10/06/2018 at 11:48, Stevie777 said:

I have. Been at this for days. Even Oregon doesn't have the info.

 

I have seen an Oregon products guide which had all the different versions of bar mounts,  dimensions and all. Just had a look on line,  can't find it. I might have a copy on a computer somewhere ....

[Stevie777]

52 minutes ago, bmp01 said:

I have seen an Oregon products guide which had all the different versions of bar mounts,  dimensions and all. Just had a look on line,  can't find it. I might have a copy on a computer somewhere ....

?