New hitch minding pulley from ISC

[Steve Bullman]

Anyone seen this?  Can't quite get my head round the design really.

 

 

Unique 'Kidney' aperture: allows for a wide variety of Karabiner connector shapes and will allow rotation of any Karabiner  allows for multiple Karabiner connections at one time allows for a Karabiner to 'centre' itself depending on where the load is applied- and allows Karabiners to 'self centre' during climbing manoeuvers, which is helpful with DdRT climbing when climbing up to a 'large limb' allows for a perfect spot to anchor a 'Sternal' anchoring device (Karabiner, hook, Chest Ascender, etc.) for use in SRT climbing on ascent with a Rope Wrench.  This connector in the 'Kidney' aperture will self align to the most efficient spot and can be removed and attached easily allow the efficient use of the Pulley as a 'trolley' and allows for self alignment of an anchoring Karabiner in the 'Kidney' aperture when used in this configuration. The Phlotich can be used effectively for 'Double Crotching' or setting up efficient mechanical advantage systems due to the multiple attachment points and the ability for multiple Karabiners anchored in the 'Kidney' aperture.

[Treerover]

I hope it has better bearings than the other 3 different pulleys I have by ISC.
All shot and excessive lateral play even on the smallest slack tending pulley (now long since retired)
Personally , DMM all the way

[josharb87]

Sometimes I think the manufactures just make things for the sake of making something! 

[Mark Bolam]

I agree Josh.

How many are you getting?

[stihlmadasever]

Maybe brought out as a competitor to the dmm hitch climber pulley.

Dont use much ISC stuff except a small rigging pulley thats had minimal use.

Dont see the point of the kidney shaped whole...