Big dogs 562xp

[eddystihl]

Looking for big felling dogs for my 562 xp , i live in holland

[Stubby]

28 minutes ago, eddystihl said:

 

Looking for big felling dogs for my 562 xp , i live in holland

Ok . Don't get 560 dawgs thinking they are the same , they arn't . 562 mounting holes are wider apart .

[shavey]

Stubby got some of the best Dawgs on his saws 

 

I’ve got some spikes here that come with the 3/4 wrap handle 

dont know if there large enough for you

 

 

[huskywilson]

Edited February 24, 2018 by huskywilson

[huskywilson]

same felling spikes as  on my 562xp also has 3/4 wrap handle , should have got  full wrap  , have to use short scrench to adjust bar nuts as they are right in line with handle .so it a bit tight   felling spikes  work well on rough pine bark 

[eddystihl]

Ok . Don't get 560 dawgs thinking they are the same , they arn't . 562 mounting holes are wider apart .

Oki thx for advice , but where to buy in europe?

[outinthewood]

Look up the part number on IPL and order from local dealer. They are a very good arrangement as they hold the saw very well when you are perched on a steep ditch etc ! but don't catch up on snedding as they sit in well. 

[eddystihl]

Look up the part number on IPL and order from local dealer. They are a very good arrangement as they hold the saw very well when you are perched on a steep ditch etc ! but don't catch up on snedding as they sit in well. 

IPL..?

[spudulike]

illustrated parts list!

[outinthewood]

Ok eddystihl  here is the part number for the "wrap handle" felling spike kit 576 87 30-02. Do get your dealer to check that number before ordering just in case something has changed or I have made a mistake !