Jensen Feed Rollers

[swinny]

1 hour ago, WesD said:

Oh just to add when we removed the old springs you could bend them quite easily by hand, the new ones wouldn’t budge!

Dont you mean just the one spring? 

 

Is yours a spring and cable with rollers or just a spring up to the top roller? 

 

Cheers.

 

mines the spring and cable. Didnt realise the springs need changine at certain hours. My jensen been to the moon and back so mighr be a good idea to change the spring and get a right cable lol 

 

also where do you get your spares from / the parts? Cheers

[WesD]

19 minutes ago, swinny said:

Dont you mean just the one spring? 

 

Is yours a spring and cable with rollers or just a spring up to the top roller? 

 

Cheers.

 

mines the spring and cable. Didnt realise the springs need changine at certain hours. My jensen been to the moon and back so mighr be a good idea to change the spring and get a right cable lol 

 

also where do you get your spares from / the parts? Cheers

Ours is a a528t so has 2 springs, yes its crazy to think they wear but when you consider the amount of use and hammer they take!

 

http://www.dennisbarnfield.co.uk/ we get spares from here, ask for Richard he deals in Jensen for them. 

[WesD]

@swinny as a side note to their service, we ordered a part yesterday and asked for a bit of haste, it was delivered this morning!

[swinny]

13 minutes ago, WesD said:

Ours is a a528t so has 2 springs, yes its crazy to think they wear but when you consider the amount of use and hammer they take!

 

http://www.dennisbarnfield.co.uk/ we get spares from here, ask for Richard he deals in Jensen for them. 

Any chance of a picture if you get chance at some point? 

 

The 528 was before the 530, wonder why they went down to one spring and or spring and wire

[swinny]

14 minutes ago, WesD said:

@swinny as a side note to their service, we ordered a part yesterday and asked for a bit of haste, it was delivered this morning!

Will give them a try then if i need to order something. Been ready to move away from jensen due to dealers i have dealt with etc

[WesD]

2 minutes ago, swinny said:

Any chance of a picture if you get chance at some point? 

 

The 528 was before the 530, wonder why they went down to one spring and or spring and wire

If i remember ill post 1 tomorrow for you. 

[James Atkinson]

While all the Jensen guys are together how do you adjust the throttle? My revs have dropped on full throttle and I can't work it out , sorry for the de rail

[WesD]

2 minutes ago, James Atkinson said:

While all the Jensen guys are together how do you adjust the throttle? My revs have dropped on full throttle and I can't work it out , sorry for the de rail

From memory I think mine has a cable to the top of the fuel pump with a spring and a adjusting rod, we have that many bits of kit though so let me check tomorrow and come back to you. 

[Coletti]

Any chance of a picture if you get chance at some point? 
 
The 528 was before the 530, wonder why they went down to one spring and or spring and wire

I've a 2012 Jensen a530 and it has 2 springs on the feed rollers.

[swinny]

11 minutes ago, Coletti said:

 

I've a 2012 Jensen a530 and it has 2 springs on the feed rollers.

 

Need pictures lol  sounds like mines missing out on some modification