Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

As title, 150 starts fine and runs fine but won't turn off at the flick of the switch. Once the switch is in the off position, a squeeze of the throttle will cause the engine to rev, and then die.

Short circuit terminals inside the handle are good and make good contact but the problem persists.

Has anyone else had this issue? I've been hearing it's not unknown but what is the solution?

Cheers

Log in or register to remove this advert

Posted

Under the top handle is a white plastic cover on the rob body of the saw. Remove the sprocket cover and this will pop off. There's an earth connection underneath. Clean it and then try.

Posted

I had a similar issue on a Husky 346, in that the kill switch would not turn the saw off so I used the choke to stop the saw.

 

Stripping it down, I found that the 2 leads going to the switch had corroded through at one point, so I replaced/soldered/shrink wrapped the offending section and I was back in business.

 

Perhaps this is a similar problem for you, and the potential break in the line is not fully corroded through so is partially short circuiting?

Posted

Joe is probably bang on, the MS150 does fail in this area and the engine mounts can also come undone - the earth connects to the top mount and is as Joe mentions! In bad cases, the bolts shear or just mash up the mount.

Posted
Joe is probably bang on, the MS150 does fail in this area and the engine mounts can also come undone - the earth connects to the top mount and is as Joe mentions! In bad cases, the bolts shear or just mash up the mount.

 

 

Haha get in!

 

Not a total div am I!

Posted
Now how could I comment on that:sneaky2::001_rolleyes::lol::001_tt2:

 

 

Fill your boots, my local Seddons referred to a 20" 3/8 chain as a "speciality item" before saying it would take a week to order in.

 

You're in no danger of losing my custom mate!

Posted
Fill your boots, my local Seddons referred to a 20" 3/8 chain as a "speciality item" before saying it would take a week to order in.

 

You're in no danger of losing my custom mate!

 

In my books a speciality item is Crispy Duck & Hoi Sin Sauce Pancakes:thumbup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.