Cleetus

I would say no to Marlow, the older version is horrible. Its final bury is done by machine, but it can be done by bhand There is a newer version coming out which is much easier to splice by hand. Start on some Yale XTC or New England Hi-vee.

https://honeybros.com/Item/Liros_magicBULLROPE_14mm

https://honeybros.com/Item/Liros_Dyramid_Cord_9-5mm

Honey Bros are now selling the Liros equivalent of AP, exactly the same and at a much better price.

Tachyon is tight, but you shouldnt struggle the way some of you are. I do find it burys alot easier if you milk the inner core back from the cross over as it disappears in to the bury. This should stop the inner core bunching up in the throat.

Honey Brothers will splice any size eye on request complete with CE markings.

Morton Follow the Samson instructions but if your splicing XTC then only remove 9 cover strands not 10 for your taper, the inner core with XTC is slightly bigger than samson 16 strands so leaving that extra strand in keeps the same diameter from the taper down. As the rope is used the throat of the splice is likely to be tight so as mentioned before whack it with a mallet which will relax the strands, then bend the throat backwards and forwards. Work the rope, dont let the rope work you. Hope this helps Lee

Teufelburger do splice. If you look on some of their products the splice is also stitched on a machine, I think it's the multi save.

Peter Unfortunatley its not as easy as just doing double braid, each diameter and brand of rope has to be CE marked individualy, All I can say is watch this space.

Peter No machines are used for Honey Brothers splicing, they are all done by 1 person (me) using the same method each time. I'am very surprised however on the lack of replies on this subject as a lot of people have been very vocal in the past about non CE marked splices and hand splicing in general. It has taken a lot of time and effort to gain the CE accreditation, which is what people wanted to see. Nick Many thanks for your reply!!!

Honeys do a very good splice.

I'll splice used rope, but you'll have to send to me, used rope can be harder Just depends on your technique

Hi all Looking at the picture above I would be only removing 9 strands from the rope not 10. The inner core of XTC is slightly bigger than Arbormaster or New england, leaving that extra strand in the bury creates the same size core as you have taken out so the splice is the same size down the length of the rope. It does however make it abit tighter pulling it through, but if you taper the end that goes in the fid you should pull it through no problem. Hope this helps

Stuart I think the XTC 12 is started by hand and the final tuck done by machine, its far to tight to do the final tuck by hand, regards Cleetus

Brighton Depot - Climbing Arborists We are currently seeking Arborists to operate from our Brighton Depot. Successful applicants would be engaged in various arboricultural works for a cross section of clients within the Local Authority, commercial & domestic sectors throughout sites in the South East of England. It is desirable for candidates to hold relevant NPTC qualifications and a full driving licence. All PPE and equipment will be provided, and training where necessary, through our continued professional development programme. Salary dependent on candidates’ level of training and experience. For an application form & job description, please contact our head office on 01737 779191. E-Mail: [email protected] Tree Surgeon & Tree Surgery. Kent, London, Sussex, Surrey Connick Tree Care are an Equal Opportunities Employer Contact: Suzanne Peters/Lee Cole Tel: 01737 779191 Email: [email protected] www: Tree Surgeon & Tree Surgery. Kent, London, Sussex, Surrey Address: Suzanne Peters/Lee Cole Connick Tree Care New Pond Farm Woodhatch Road Reigate RH2 7QH