Jump to content

Log in or register to remove this advert

Recommended Posts

Posted
some people reckon the bend ratio is too acute and therefore can weaken the rope. Compared to the pin inside the cocoon though, the bend ratio is nothing. You could use 2 revolvers opposite each other or a standard crab and pulley.

 

But if theres not slack in the system there would be no shock loading,there fore the rope wouldnt be weakend?? (as much)

Log in or register to remove this advert

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Posted

:thumbup1:

 

So going back to that photo of yours,does the system move(hense the revolver)or just stay the same?Its all new to me btw and havnt used it yet? revolver on its way from uk :thumbup1:

Posted

yeah the whole hitch will move away from you as you slide the little webbing prussic away. Good to do this before you cut abranch off at the end of a long limb as you can still hold the branch and walk in one handed with no slack (good when working over other peoples property boundary lines). Then put weight in your line and grab the hitchclimber and webbing prussic and pull back to your bridge before you walk back out on a limb.The more you use it the quicker the whole thing becomes.

Posted
Whoa don't use that in a tree that biner to the sling needs to be a double locking minimum.

 

Why? It is not load-bearing, it merely provides the adjustment for the system

Posted

it must take some load pete surely, and if it breaks and the sling moves away then how are you going to get it back without a lot of faffing about and if you were hanging then you are going to pretty stuck if you cant get your strop round the stem or branch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.