Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

hi all, today filled the 20t with chain oil in the fuel tank and petrol in chain tank!!! started engine run for a bit then realised what we had done. fluched out both tanks and now engine running ok but with it seems with loss of power when cutting. any way to solve this or is the engine buggered ??:

Log in or register to remove this advert

Posted

Highly unlikely to have done any lasting damage and the oil will flush through with the fuel being used in normal operation. Just use it over the next few days and normal power should come back after a couple of tanks.

Posted

hi spud, thanks for that, I will take your valued knowledge for it. however, why do you think it has lost that power, I'm sure its not my imagination, just would like to hear your comments,

Thanks

Posted
hi all, today filled the 20t with chain oil in the fuel tank and petrol in chain tank!!! started engine run for a bit then realised what we had done. fluched out both tanks and now engine running ok but with it seems with loss of power when cutting. any way to solve this or is the engine buggered ??:

 

On the lash last night was you?....

Posted
Ok,thanks Geoff, fingers crosssed

 

You should be fine once it's run through, it's the one time when I'm glad of a primer bulb to flush the system.:blushing::001_smile:

Posted
hi spud, thanks for that, I will take your valued knowledge for it. however, why do you think it has lost that power, I'm sure its not my imagination, just would like to hear your comments,

Thanks

 

The oil will have soaked in to the tank filter, it is possible that some is laying in the carb and its many cavities etc. The fuel will thin and dissolve the oil and it will be drawn through and burnt with normal use.

 

It is possible the oil may have got in to some of the jets and circuits in the carb and not allowing quite as much fuel mix to flow through but the fuel will thin it out and it will dissipate.

Posted

We've all done it. My mate even mixed up 5 litres of diesel and 2 stroke oil and put that in my husky and his Stihl. Husky didn't like it and would not start but his 461 ran a whole tank through it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.